Installation Disclaimer

Agreement for provision and installation of the Guardsman Barrier by Image4 Security:

 

1. Image4 Fabrications has made every attempt to ensure the accuracy and reliability of the positioning of the product using the instructors (purchaser) guidance for identifying the install position within their home.
 
2. Owner takes full responsibility for the instructed location of the installation. If this then falls onto someone else’s property Image4 Fabrications takes no legal or financial responsibility for removal.
 
3. Image4 Fabrications completes works based on the understanding and assumption that the instructor (purchaser) has the necessary legal rights to the property and install position.
 
4. Due to the nature of the install, once the install has been completed, the instructor (purchaser) takes full responsibility for the product being immovable and therefore un-returnable. If the purchaser does want to return the purchase they would be responsible for the cost of removal including but not exhaustive of: labour (drive time and job time), tools required to safely remove the product and any admin costs.
 
5. The instructor (purchaser) understands that any holes drilled into either the floor, for securing the ground plates, or the walls, for securing stabilizing plates will be undertaken as carefully as possible.
 
6. The instructor (purchaser) gives Image4 Fabrications permission to drill holes of various width and depth, as mentioned in statement 5, in order to securely install the product purchased.
 
7. Image4 Fabrications takes no responsibility for any damage incurred when drilling these holes and the instructor (purchaser) must ensure, to the best of their knowledge that the ground is of sufficient quality to be drilled to a depth of 100mm and the wall is of sufficient quality to be drilled to a depth of 50mm and both can support the weight of the product, up to 25kg.
 
8. If the structure fails beyond the scope of the install, Image4 Fabrications will not take responsibility for corrective action required.
 
9. The instructor (purchaser) takes full responsibility for ensuing a one metre radius is cleared and allowed in order for the product to be installed in its chosen position within the dwelling. Any object encroaching within this radius may need to be removed prior to installation. If this is of significant weight, size, and thus would take a significant amount of time to be removed, Image4 Fabrications retains the right to cancel the install and have this re-booked once the object/s have been removed. This would come at an additional cost to the instructor (purchaser).
 
10. The instructor (purchaser) gives Image4 Fabrications permission to photograph the install area both before and after installation has taken place. These photographs will be securely kept on record indefinitely.

Purchaser Guarantee:

1. The purchaser is entitled to a full 2 year guarantee on both the strut/piston and barrel lock and a full 10 year guarantee on all mechanical parts produced by Image4 Fabrications – these include the telescopic barrier arm, pivot action and both receiving and blocking arm posts. If these items were to fail within the specified time then these would be replaced free of charge by Image4 Fabrications by contacting them through their website image4security.com. If outside of this time frame these can be purchased at a cost to the customer. Installation of bought items would be the responsibility of the purchaser.
 
2. Please retain this paperwork as proof of purchase and guarantee.

Waiver:

1. The barrier only performs its security purpose when in the downwards locked position. When it is in the upright position it does not perform its security purpose.
 
2. Image4 Fabrications is not responsible for any items stolen from the property following the installation of one of Image4 Fabrications products.
 
3. When operating any product do not place any body part in any areas which could cause harm. It is the purchaser’s responsibility to ensure the product is used as for its intended purpose.
 
4. The blocking arm structure will bend if force is applied, such as sitting on the barrier arm when in the downward locked position. This does not impede the security of the product however this will affect the telescopic motion. Image4 Fabrications will not be responsible for correcting the blocking arm structure if the product has not been used as intended.
 
5. It is the purchaser’s responsibility to unlock and raise the barrier from the downward locked position when removing any vehicle from behind it.
 
6. Once the product is installed it is then the full responsibility of the purchaser to operate and maintain.
 
7. Over time the product may rust due to the environment it is kept within. This rusting is a natural process and will not impact the security of the barrier. Image4 Fabrications will not be responsible for correcting this change.
 
8. The Guardsman barrier performs at optimum security when positioned behind the garage pier, underneath the up and over garage door, due to the height restrictions of the garage opening. Therefore if positioned away from this site, security many be reduced as a result.
 
Non compliance with the above waiver will void the purchaser guarantee.

Customer Requirements:

Pre-Installation:
Purchaser is to agree the below prior to install -
1. To read and agree the above Installation Disclaimer, Purchaser Guarantee and Waiver.
 
2. To identify suitable location for installation including, to the best of their knowledge that walls and floor are suitable for the weight and size of the product.
 
3. To ensure a 1 metre radius is made clear on either side of the installation location.
 
4. Arrange installation time and date.
 
On the Day of Installation:
Purchaser is to ensure the below -
1. A responsible adult is available at the time of install to confirm the installation location.
 
2. To have signed against Installation Disclaimer before work commences.
 
3. Area is safe and free from animals.
 
Post Installation:
Purchaser is to ensure the below -
1. Not to use the product for 24 hours after install to allow the resin to fully harden.
 
2. To ensure the barrier is used for its intended purpose.
 
Image4 Fabrications will ensure all personal details are kept safely and securely in accordance with General Data Protection Regulations 2018.
CUSTOMER INSTALLATION DISCLAIMER:

Agreement for provision and self installation of the Guardsman

Barrier:

Customer Installation Disclaimer:

1. The Image4 Security installation disclaimer points made above: 'Agreement for provision and installation of the Guardsman Barrier by Image4 Security' are also relevant to the customer installation, only re-worded to be directed at the customer.
 
2. The customer takes full responsibility and ownership for the outcome of their install. If the installation instructions and install video are not followed then Image4 Security will not be held responsible. All details of the instructions are vital to the success of the install and it is the customer’s responsibility to read, understand and implement each step accurately.
 
3. The customer must ensure they have and use the correct tools as outlined in the instructions and that the floor and wall is of suitable quality to hold the barrier posts in place securely.
 
4. If the customer does need assistance then they can book an install through Image4 Security however any damage caused to the Guardsman due to incorrect installation being carried out or if any additional materials are needed to complete the install, such as new fixings, these will be charged to the customer at the relevant cost. This will be communicated prior to works being carried out.
 
5. If however any fixings fail the customer needs to contact Image4 Security to order a replacement which will be delivered promptly and free of charge.
 
6. If the Guardsman arrives damaged please contact Image4 Security to discuss the best solution. Image4 Security reserves the right to request photographic evidence of the damage. Image4 Security will act promptly in order to try and resolve the issue.

Purchaser Guarantee:

1. The purchaser is entitled to a full 2 year guarantee on both the strut/piston and barrel lock and a full 5 year guarantee on all mechanical parts produced by Image4 Fabrications – these include the telescopic barrier arm, pivot action and both receiving and blocking arm posts. If these items were to fail within the specified time then these would be replaced free of charge by Image4 Fabrications by contacting them through their website image4security.com. If outside of this time frame these can be purchased at a cost to the customer. Installation of bought items would be the responsibility of the purchaser.
 
2. Please retain this paperwork as proof of purchase and guarantee.

 

Waiver:

1. The barrier only performs its security purpose when in the downwards locked position. When it is in the upright position it does not perform its security purpose.
 
2. Image4 Fabrications is not responsible for any items stolen from the property following the installation of one of Image4 Fabrications products.
 
3. When operating any product do not place any body part in any areas which could cause harm. It is the purchaser’s responsibility to ensure the product is used as for its intended purpose.
 
4. The blocking arm structure will bend if force is applied, such as sitting on the barrier arm when in the downward locked position. This does not impede the security of the product however this will affect the telescopic motion. Image4 Fabrications will not be responsible for correcting the blocking arm structure if the product has not been used as intended.
 
5. It is the purchaser’s responsibility to unlock and raise the barrier from the downward locked position when removing any vehicle from behind it.
 
6. Once the product is installed it is then the full responsibility of the purchaser to operate and maintain.
 
7. Over time the product may rust due to the environment it is kept within. This rusting is a natural process and will not impact the security of the barrier. Image4 Fabrications will not be responsible for correcting this change.
 
8. The Guardsman barrier performs at optimum security when positioned behind the garage pier, underneath the up and over garage door, due to the height restrictions of the garage opening. Therefore if positioned away from this site, security many be reduced as a result.
 
Non compliance with the above waiver will void the purchaser guarantee.
 
Image4 Fabrications will ensure all personal details are kept safely and securely in accordance with General Data Protection Regulations 2018.